Knitting Technology with Flow Chart
Md. Mezanur Rahman
Merchandiser
Birds A & Z Ltd.
Email: mizanur.btec@gmail.com
Knit Fabric:
The fabric is produced by making a loop by needle this is called knit fabric. This is produced by Interlooping or Intralooping process. Knit fabric is produced by a knitting machine using different type of cam design (Such as Knit Cam, Tuck Cam, Miss Cam). This is a continuous process for making knit fabric. Knit fabrics have different features such as good comfort ability, good texture, wrinkle, bulky effect, good elasticity, easy to sew and wear. There is also low wastage rate in knit fabric than woven fabric. Knit fabric has good porosity of air & water.
Knit Fabric Manufacturing Process with Flow Chart:
Knit fabric is produced by different step. At first we should collect yarn from spinning, which is made by following a process such as blow room, carding, pre-comber drawing, super lap former, combing, drawing, simplex, ring frame. Then this Ring is converting into winding cone by ring bobbin and creeling in the knitting section. Then this yarn is knitted by looping process to make knit fabric. I mention the easiest flow chart of knit fabric manufacturing in below.
Flow Chart of Knit Fabric Manufacturing Process
Knitting Machine
I think it is the best and an easiest flow chart of knit fabric manufacturing. There is some additional process for knit fabric manufacturing such as seeding, brush, wash, AOP. But it depends on buyer requirement and manufacturing process.
Speech from the writer:
If you read this article with full concentration, then you can easily answer the following questions-
- Advantage of Knitting Process
- Flow Chart of Knit Fabric Manufacturing
- Flow Chart of Knit Fabric Manufacturing
- Manufacturing Process of Knit Fabric
- Manufacturing Process of Knit Fabric
- Process Flow Chart of Knit Fabric Process
- Flow Chart of Knit Fabric
- What is Knit Fabric What is Knit Fabric
Founder & Editor of Textile Merchandising. He is an Assistant Professor and Chairman of the Textile Engineering Department of a Reputed University in Bangladesh. He has performed numerous Research Regarding Textile Engineering. He has also received two times “Research & Development Fellowship” from the Ministry of Science & Technology in Bangladesh. For any further queries, please contact email at raju.uttara105@gmail.com or WhatsApp at +8801673758271.